COMPEED® Blister Plasters (For Toes)
COMPEED® Blister Plasters (For Toes)
COMPEED® Blister Plasters (For Toes)
COMPEED® Blister Plasters (For Toes)
COMPEED® Blister Plasters (For Toes)
COMPEED® Blister Plasters (For Toes)
COMPEED® Blister Plasters (For Toes)
COMPEED® Blister Plasters (For Toes)

COMPEED® Blister Plasters (For Toes)

COMPEED® on toes blister plasters provide instant pain relief. Whilst absorbing excess moisture, the plaster forms a protective cushion and provides optimum healing conditions. Specially designed for blisters on toes which are sometimes awkward to reach.

x5 # of Plasters
Where to buy

Hydrocolloid technology

COMPEED® hydrocolloid technology is an active gel with moisture absorbing particles. Thick cushioning redistributes pressure from the blister to deliver instant pain relief. COMPEED® has a tapered edge so it contours smoothly with the skin’s surface. This reduces friction and ensures the healing process is not disrupted by painful rubbing.

Stays in place for several days. Individual experience may vary.

Instant pain relief
Fast Healing
Stays in place for days

Properties of plaster

Properties of plaster
  1. Deep cushioning to relieve pressure and prevent painful rubbing

  2. Ultra adhesive and tapered edges so COMPEED® flexes with movement and stays in place for several days

  3. Translucent edges blend in with the skin

  4. Form fitting waterproof and breathable design keeps natural moisture in and germs out for faster natural healing

Learn how to use COMPEED® in 50 seconds

  1. Clean and dry skin before use, ensuring blister area is free of creams and oils.
  2. Remove the bottom paper, avoiding touching the adhesive side.
  3. Apply plaster firmly over blister, ensuring the edges are well smoothed down.
  4. Leave in place until it starts to detach (Note: may stay in place up to several days).
  5. To remove plaster: do not pull upwards but slowly stretch along the skin.

Compeed Toes Blister FAQ

Are COMPEED® blister plasters waterproof?

Yes, COMPEED® plasters are waterproof. Although contact with water may reduce the adhesion, water will only enter through the edges of the patch, not through the outer film. If the adhesion is reduced , remove the plaster carefully by slowly stretching along the skin and replace with a new one.

Can I put COMPEED® on an open blister?

COMPEED® Blister plasters can be used at the stage when the blister is open, creating a wound. COMPEED® will protect from infection, dirt and water, and creates a moist environment which helps the healing. COMPEED® should be applied after the wound has been cleaned and dried.

How long should you leave a COMPEED® blister plaster on for?

The plaster should stay firmly in place for several days allowing your skin to repair itself. Please do not attempt to remove the plaster until it starts peeling off at the edges.